Reading The Led Lamps - Ricoh Printer Quick Installation Manual

Hide thumbs Also See for Printer:

Table of Contents

3. Connecting the Printer Cables

Connect the other end of the cable to the network, such as a hub.

• The printer's Ethernet and USB ports are not available when the Gigabit Ethernet board is attached

to the printer.

• "Network Connection", Software Guide.

• p.40 "Installing the Interface Units"

Reading the LED Lamps

For the standard Ethernet port

1. Yellow: comes on when 100BASE-TX is being used. It comes off when 10BASE-T is being used.

2. Green: comes on when the printer is properly connected to the network.

Table of Contents