Using The Envelope Lever - Ricoh Printer Quick Installation Manual

Hide thumbs Also See for Printer:

Table of Contents

Using the Envelope Lever

• The inside of the machine becomes very hot. Do not touch the parts with a " " label (means

hot surface). Touching a part with a " " label (means hot surface) could result in a burn.

• The fusing unit becomes very hot. When installing the new fusing unit, turn off the printer and

wait about an hour. After that, install the new fusing unit. Not waiting for the unit to cool down

can result in a burn.

Open the rear cover.

If the optional duplex unit is attached, push down the lever on the right side of the duplex

unit ( ), and then pull it out until it stops ( ).

Using the Envelope Lever

Table of Contents