Ricoh Printer Quick Installation Manual page 519

Message
Snmp over IPv4 is ready.
Snmp over IPv6 is ready.
Snmp over IPX is ready.
trap account is unavailable.
Updated (option name) (value) via DHCPv6 Server The parameter obtained from the DHCP server has
WSD (Device) started.
WSD (Printer) started.
• For details about UNIX commands and parameters, see UNIX Supplement.
• For details about "syslog" command, see "Remote Maintenance by telnet".
• p.218 "Remote Maintenance by telnet"
Problem and solutions
specified SMTP password is incorrect. Check the
SMTP user name and password.
Communication over IPv4 with snmp is available.
Communication over IPv6 with snmp is available.
Communication over IPX with snmp is available.
v3Trap cannot be sent. This could be because the
Trap destination account is different from the
account specified by the printer.
been updated.
WSD (Device) has started.
WSD (Printer) has started.
Message List
5
281