Ricoh Printer Quick Installation Manual page 285

13. After the installation is completed, select one of the options to restart the computer either
now or later, and then click [Finish].
Restart the computer to complete installation.
Installing the PostScript 3 Printer Driver
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
The default interface language is English.
The printer driver with the selected language will be installed. The English printer driver is installed
when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian,
Catala, Turkce.
4. Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
Step 5 does not apply for Windows Vista users.
5. Click [Next >].
The following procedure depends on your operation system.
Windows 2000:
1. [Local printer], and then click [Next >].
A dialog box for selecting the printer manufacturer and model name appears.
2. Select [LPT1] at the [Printer Port] dialog box, and then click [Next >].
3. Select whether or not to share the printer, and then click [Next >].
4. Select the name of the machine whose driver you want to install, and then click [Next
>].
5. Specify whether or not to print a test page, and then click [Finish].
The printer driver installation starts.
Restart the computer to complete installation.
Other than Windows 2000:
1. Click [Local printer attached to this computer].
If you are using other than Windows Vista, click [Next >].
2. Select the port you want to use, and then click [Next >].
A dialog box for selecting the printer manufacturer and model name appears.
Printing with Parallel Connection
1
47