Ricoh Printer Quick Installation Manual page 339

• When the number of set quantity is changed, the changed quantity is applied to all selected files.
• When printing is completed, the stored file will be deleted.
• To stop printing after printing has started, press the [Job Reset] key. The file will be deleted.
Deleting Sample Print files
If you are not satisfied with the sample printout, you can delete the Sample Print file, revise it and print it
again until the settings are suitable.
Deleting a selected Sample Print file only
1. Press the [Menu] key.
The [Menu] screen appears.
2. Press the [ ] or [ ] key to display [Sample Print], and then press the [
3. Press the [ ] or [ ] key to display [Delete One File], and then press the [
The file name and the time when the job was stored appear.
4. Press the [ ] or [ ] key to display the file you want to delete, and then press the [
key.
To cancel deleting a Sample Print file, press the [Escape] key.
5. Check the file you want to delete is displayed, and then press the [
Printing from the Print Job Screen
Enter] key.
Enter] key.
Enter]
Enter] key.
3
101