Using The Installation Shell Script - Ricoh Printer Quick Installation Manual

Hide thumbs Also See for Printer:

Table of Contents

UNIX Configuration

Using the Installation Shell Script

The installation shell script helps with the setup process. The installation shell

script automates some of the tasks in configuring /etc/hosts, /etc/printcap; cre-

ating the spool directory for BSD UNIX; and running the lpadmin command for

System V UNIX.

❒ The installation shell script can be used on the following workstations: (it can-

not be used with other types of workstations.)

• SunOS 4.x.x

• Solaris 2.x(Sun OS 5.x), Solaris 7, Solaris 8

• Red Hat Linux

• OpenServer

❒ Depending on security settings when installed, rsh / rcp /telnet may not be

usable with Red Hat 7.1 or later. Change the security level to allows use of rsh

/ rcp /telnet. For details about how to change the setting, see the operating

instructions for Red Hat.

❒ When you use NIS (Network Information Service) or DNS, you should con-

figure the server before running the installation shell script.

❒ Installation shell script does not support CUPS. For details about the settings

of CUPS, see the manual that comes with the UNIX workstation , and the

CUPS' manual.

❒ When you use Solaris and HP-UX, you can set UNIX configuration with ad-

mintools that came with Solaris and HP-UX. For details about setting using

the admintools, see the admintool's manual.

For details about the configuration utility of your operating system, see the

manual that came with the utility.

Table of Contents