Configuration; Ethernet Configuration - Ricoh Printer Quick Installation Manual

4. Configuration

This chapter explains supported network connections, and settings for the IP addresses and the Wireless
LAN security.

Ethernet Configuration

Configure the following network settings according to the network interface you are using.
You can use SmartDeviceMonitor for Admin or a Web browser to configure IP address-related settings in
a TCP/IP-capable environment.
• Configure the printer for the network using the control panel.
• The following table shows the control panel settings and their default values. These items appear in
the [Host Interface] menu.
Setting Name
IPv4 Settings
IPv6 Settings
IPsec
Frame Type (NW)
Active Protocol
Ethernet Speed
IEEE802.1X Auth
LAN Type
Value
• DHCP: On
• IPv4 Address: 11.22.33.44
• Subnet Mask: 0.0.0.0
• Gateway Address: 0.0.0.0
Stateless Sett.: Active
Not Active
Auto Select
• IPv4: Active
• IPv6: Not Active
• NetWare: Active
• SMB: Active
• AppleTalk: Active
Auto Select
Not Active
Ethernet
4
61