Ricoh Printer Quick Installation Manual page 124

5. Paper and Other Media
• Set the size and direction of the loaded paper on the control panel and with the printer driver. Make
sure the settings do not conflict. Otherwise, the paper may jam or the print quality may be affected.
• Confirm that paper fits under the side guides.
• Sheets of A4 or 8
hand so it feeds in properly. Additionally, since paper feeding and image quality may differ depending
on paper thickness and width, check print results in advance using paper you intend to print on.
1. Press the mark in the center of the Bypass Tray.
5
2. Open the Bypass Tray.
3. Slide the side guides outward, and load paper until it stops with the print side up.
106
1
/ × 11 length or longer must be loaded one at a time. Support the paper by
2
BMU052S
BMU053S
BMU054S