Ricoh Printer Quick Installation Manual page 620

9. Appendix
ftp
Use the "put" or "mput" command according to the number of files to be printed.
When one file is printed
ftp> put \pass name\file name [option]
When multiple files are printed
ftp> mput \pass name\file name [\pass name\file name...] [option]
1. Formulate the printer's IP address or the host name of the hosts file printer as an argument
and use the "ftp" command.
% ftp printer's IP address
2. Enter the user name and password, and then press the [
For details about the user name and password, consult your administrator.
User:
Password:
3. When printing a binary file, set the file mode to binary.
ftp> bin
When printing a binary file in ASCII mode, print may not come out correctly.
4. Specify files to be printed.
The following shows the examples of printing a PS file named "file 1" in the "C:\PRINT" directory and
printing file 1 and file 2.
ftp> put C:\PRINT\file1 filetype=RPS
9
ftp> mput C:\PRINT\file1 C:\PRINT\file2
5. Quit ftp.
ftp> bye
• "=", ",", "_", and ";"cannot be used for filenames. File names will be read as option strings.
• For "mput" command, option can not be defined.
• For "mput" command, "*" and "?" can be used as wild cards in file names.
• When printing a binary file in ASCII mode, print may not come out correctly.
382
Enter] key.