Ricoh Printer Quick Installation Manual page 5

Handling Power Cords and Power Plugs
R WARNING:
• Only connect the machine to the power source described in the man-
ual.
• Disconnect the power plug (by pulling the plug, not the cable) if the
power cable or plug becomes frayed or otherwise damaged.
• Connect the power cord directly into a wall outlet and never use an ex-
tension cord.
• Do not damage, break or make any modifications to the power cord.
Do not place heavy objects on it. Do not pull it hard nor bend it more
than necessary. These actions could cause an electric shock or fire.
• It is dangerous to handle the plug with wet hands. Doing this may re-
sult in receiving an electric shock.
• Confirm the wall outlet is near the machine and freely accessible, so
that in the event of emergency, it can be unplugged easily.
• Avoid multi-wiring. This actions could cause an electric shock or fire.
• Avoid connecting multiple including this printer to the same power
source.
• The supplied power cord is for use with this equipment only. Do not
use with other appliances. Doing so may result in fire, electric shock,
or injury.
R CAUTION:
• To disconnect the power cord, pull it out by plug. Do not drag the cord itself.
Doing so may result in damage to the cord, leading to fire or electric shock.
5