4. Making Printer Settings Using the Control Panel
5.
Press the [ ] or [ ] key to select the lead time needed to switch to the Energy Saver mode.
6.
Press the [
Wait two seconds. The [Energy Saver] screen appears.
7.
Press the [Menu] key.
The initial screen appears.
4
System Menu parameters
This section explains about parameters that can be set on the System menu.
Prt. Err Report
You can select [On] or [Off] to have an error report printed when a printer error or memory error
occurs.
• Off
• On
• Default: Off
Auto Continue
You can make the Auto Continue setting. When set to on, printing continues after a system error occurs.
• Off
• Immediate
• 1 minute
• 5 minutes
• 10 minutes
• 15 minutes
• Default: Off
• If you set [Auto Continue] to On, a job might be cancelled if an error occurs while it is printing
out. When a job is cancelled due to error, the printer automatically begins the next job in the
queue.
150
Enter] key.