Lpr; Netware - Ricoh Printer Quick Installation Manual

Hide thumbs Also See for Printer:

Table of Contents

If "on" is selected, IPv6 requests information required for maintaining stateful connection to the router

for as long as the printer power is turned on. This setting allows information from the router to be

obtained constantly, and periodically refreshes the effective period of the stateless address.

lpr

Use the "lpr" command to view and configure LPR settings.

View setting

Checking host name when deleting the job

msh> lpr chkhost {on|off}

If "on" is selected, you can delete print jobs only from the IP address of the host that sent the print job.

If LPR is disabled, you can also delete print jobs sent from IP addresses other than that of the host.

Printer Error Detection Function

lpr prnerrchk {on|off}

If you set this to "on", the printer stops receiving data and will wait until the error is resolved before

continuing processing a job.

Use the "netware" command to configure the NetWare settings such as the print server name or file server

Netware printer server names

msh> netware pname "character string"

• Enter the NetWare print server name using up to 47 characters.

Netware file server names

msh> netware fname

• Enter the NetWare file server name using up to 47 characters.

msh> netware encap {802.3|802.2|snap|ethernet2|auto}

Remote printer number

msh> netware rnum {0-254}

msh> netware timeout {3-255}

Remote Maintenance by telnet

Table of Contents