Epson Stylus Pro 3800 Service Manual page 280

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
[Lubrication 13]
Part Name Torsion Spring, 0.15
Lubrication Point On the Torsion Spring 0.15 at the right side of the Board Paper Tray
with where the SHAFT, PAPER GUIDE, BOARD PAPER contacts
Lubricants G-45
φ
Amount 2 mm x 2 mm x 2 points
Remarks Apply with a syringe. (Pin head:
Torsion Spring, 0.15
Lubrication
Point
MAINTENANCE
φ
2 mm)
SHAFT, PAPER GUIDE,
BOARD PAPER
Lubrication
[Lubrication 14]
Part Name STACKER, ASSY
Lubrication Point On the SHAFT, STACKER, A with where the STACKER, A contacts
(three points: the left, center, and right)
Lubricants G-26
φ
Amount 1. 2 mm x 2 mm x 1 point
φ
2. 2 mm x 2 mm x 1 point
φ
3. 2 mm x 2 mm x 2 points
Remarks Apply with a syringe. (Pin Head:
Left side
Lubrication SHAFT, STACKER, A
Point 1
Center
Revision C
φ
2 mm)
Right side
Lubrication
Point 3
STACKER, A
Lubrication Point 2
280