Epson Stylus Pro 3800 Service Manual page 154

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
4. Pull out the tube of the PRESSURE, PUMP, ASSY. from the left side of the
FRAME, HOLDER, IC, ASSY.
5. Remove the FFC, ASSY., HOLDER from the nine connectors on the FRAME,
HOLDER, IC, ASSY.
When performing the next steps, be careful not to bend the FFC.
C A U T I O N
6. Bow the center of the FFC, ASSY., HOLDER and release it from the 20 tabs.
7. Release the FFC, ASSY., HOLDER from the tab on the left side of the FRAME,
HOLDER, IC, ASSY.
DISASSEMBLY & ASSEMBLY
See Figure 4-81.
Disassembly/Assembly Procedure (Group 1)
FFC ASSY., HOLDER
FRAME, HOLDER, IC, ASSY.
tab
Connectors
tube of the
PRESSURE,
PUMP, ASSY.
Figure 4-81. Releasing the FFC ASSY., HOLDER
Revision C
tab
154