Epson Stylus Pro 3800 Service Manual page 103

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
4.3.3.8 HOUSING, LEFT
Do not remove or install the HOUSING, LEFT roughly, or the
C A U T I O N
hooks and the tabs on the HOUSING, LEFT may be damaged or
broken.
1. Remove the HOUSING, REAR, ASSY.
2. Remove the HOUSING, FRONT, LEFT.
3. Hold the front part of the HOUSING, LEFT and slightly lift it to release the tabs
(A, B) on the upper part of the Housing and the hook (C) in the Housing as shown
in Figure 4-14, and remove the HOUSING, LEFT.
Be sure to engage the lower hook (C) with the tab on the main unit
first, then engage the tabs (A, B) pulling the upper part of the
HOUSING, LEFT upward.
DISASSEMBLY & ASSEMBLY
(p96)
(p98)
Disassembly/Assembly Procedure (Group 1)
A
HOUSING, LEFT
C
Figure 4-14. Removing the HOUSING, LEFT
Revision C
B
Inside the HOUSING
103