Epson Stylus Pro 3800 Service Manual page 203

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
4.4.1.4 PAPER, DETECTOR, ASSY.
1. Remove the HOUSING, UPPER.
2. Pull out the BASE, ENCLOSURE.
3. Disconnect the cable from CN54 on the BOARD ASSY., MAIN.
4. Remove the acetate tapes on the COVER, ENCLOSURE, ASSY. to release the
cables of the PAPER, DETECTOR, ASSY. (PE SENSOR).
Route the cables of the PAPER, DETECTOR, ASSY. with other
cables and secure them with the acetate tapes as shown in
4-156.
5. Release the cables of the PAPER, DETECTOR, ASSY., from the three cable
hooks. See Figure 4-157.
6. Remove the ASF, ASSY. (p197)
DISASSEMBLY & ASSEMBLY
(p107)
(p111)
See Figure 4-29.
See Figure 4-156.
Disassembly/Assembly Procedure (Group 2)
Right rear side
Figure
Figure 4-156. Releasing the PAPER, DETECTOR, ASSY. (PE SENSOR) Cables
Right rear side
Figure 4-157. Releasing the PAPER, DETECTOR, ASSY. Cables
acetate tape
COVER, ENCLOSURE, ASSY.
Revision C
cable hooks
203