Epson Stylus Pro 3880 ® Start Here Start Here Unpack Make sure you have these items: User's Guide Printer Power cord CD-ROM Ink cartridges Rear sheet guide Limited Warranty The printer weighs about 43 pounds (20 kilograms) and should be lifted and moved Warning: by two people.
Turn On the Printer Connect the power cable. (Do not connect the printer cable yet.) Press the Power button. Ink cover After a minute, the ink cover is automatically released. Install Ink Cartridges Lift the ink cover. If the ink cover is locked, press the Note: cover open button on the control panel to release it.
Macintosh Make sure your Macintosh and printer are turned on. Connect the USB cable. Use any open USB port on your computer. Make sure the Epson Stylus Pro 3880 is securely connected. Insert the Epson Stylus Pro 3880 software CD.
Windows Make sure the Epson Stylus Pro 3880 is NOT CONNECTED to your computer. If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. You Note: can’t install your software that way. Insert the Epson Stylus Pro 3880 software CD.
Load Paper You can load paper in the auto sheet feeder, the rear manual feed slot, or the front manual feed slot. In the front or rear slot, load just one sheet at a time. Follow the instructions below to load paper in the auto sheet feeder or the rear manual slot.
Epson ink and paper online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). Epson and Epson Stylus are registered trademarks and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. Epson Preferred is a service mark of Epson America, Inc.