Download Print this page

Epson Stylus Pro 9880 Getting Started

For epson stylus pro 9880; stylus pro 4880; stylus pro 7880; stylus pro 3800.
Hide thumbs

Advertisement

CERTIFIED
SYSTEM
Certi ed –
June, 2004
ColorBurst RIP for
Epson Stylus
Pro Edition
®
3800 4880 7880 9880

GETTING STARTED

Advertisement

   Related Manuals for Epson Stylus Pro 9880

   Summary of Contents for Epson Stylus Pro 9880

  • Page 1: Getting Started

    CERTIFIED SYSTEM Certi ed – June, 2004 ColorBurst RIP for Epson Stylus Pro Edition ® 3800 4880 7880 9880 GETTING STARTED...

  • Page 2: Getting Started

    Note: The file names and paths may be slightly different, depending on your printer model. If you are using the Epson Stylus Pro 7880 or 9880 printer, you need to attach the included USB key to the computer that is running the RIP server.

  • Page 3

    Once the RIP server is installed and set up, see the appropriate section to set up client systems for printing: ■ “Mac OS X Clients Printing to a Mac OS X RIP Server” on page 3 ■ “Mac OS X Clients Printing to a Windows RIP Server” on page 4 ■...

  • Page 4

    In Mac OS X 10.3.x, select 7. Select the ColorBurst RIP print server name from the Bonjour or Rendezvous printers. Print & Fax Printer Setup Utility folder. from the pop-up menu. Rendezvous ColorBurst PPD Applications >...

  • Page 5

    You see the ColorBurst RIP Print Server name in the printer list. 10. Close the Print & Fax window or the Printer Setup Utility. You’re ready to print to the ColorBurst RIP. Mac OS X Clients Printing to a Windows RIP Server These instructions are for Mac OS X 10.3.x through 10.5.x.

  • Page 6

    9. Select the Windows computer name where the ColorBurst RIP is running. In 10.4.x or 10.3.x, click 10. Select ColorBurst RIP Printer Model or Printer Using list. If you don’t see the ColorBurst RIP driver under the Printer Model or Print Using list, select Printers\PPDs\Contents\Resources and click (10.5.x) or...

  • Page 7

    You see the ColorBurst RIP Print Server name in the printer list. 12. Close the Print & Fax window or the Printer Setup Utility. You’re ready to print to the ColorBurst RIP. Windows Clients Printing to a Windows RIP Server ColorBurst supports 32-bit versions of Windows Vista, Other versions of Windows, including 64-bit versions, are not supported.

  • Page 8

    6. Browse the network and select the ColorBurst shared printer, then click . Click Next Install driver 7. If you want to use the ColorBurst RIP as your default printer, choose Set as the default printer checkbox or choose default printer 8.

  • Page 9

    5. Windows Vista: Click the Windows XP or 2000: Double-click the Next 6. Select the Local printer Automatically detect and install my Plug and Play printer unchecked. Then click 7. Click Create a new port Next 8. Windows Vista: Uncheck select the driver to use 9.

  • Page 10

    LPR Byte Counting Enabled 15. Click 16. Click Next 17. Windows Vista: Click Windows XP or 2000: Click Printer Port Wizard. 18. At the next screen, click 19. Browse to the folder that you unzipped. Click 20. Click to return to the Open System Preferences >...

  • Page 11

    22. Select , then click ColorBurst Next 23. Leave the default name or enter a new name in the Printer name box. Then click Next 24. Follow the on-screen instructions to install the software. 25. At the end of the installation, click Finish 26.

  • Page 12

    General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. The contents of this manual are subject to change without notice.

  • Page 13

    Printed in USA CPD-25014...

Comments to this Manuals

Symbols: 0
Latest comments: