Epson Stylus Pro 3800 Service Manual page 200

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
Be sure to position the notch of the FLAG, DETECTOR,
RELEASE and the red marking part of the SPUR GEAR, 22, B
as shown in the figure below to install the MOTOR, RELEASE,
ASSY.
FLAG, DETECTOR, RELEASE
Route the cables correctly as shown in the figure below.
Adjust the length of the cables
and secure them with cable hooks.
DISASSEMBLY & ASSEMBLY
positioning point
SPUR GEAR, 22, B
cable of MOTOR
ASSY.,RELEASE
cable of MOTOR ASSY., PF
Disassembly/Assembly Procedure (Group 2)
Revision C
200