Epson Stylus Pro 3800 Service Manual page 148

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
12. Tilt the FRAME, PAPER, EJECT, ASSY in the direction shown in the
4-74. Lift up the right side of the FRAME, PAPER, EJECT, ASSY slightly to pass
it over the bump of the FRAME, ASSY, MAIN as shown in the
13. Remove the FRAME, PAPER, EJECT, ASSY following the steps shown in the
Figure 4-75.
FRAME, PAPER, EJECT, ASSY
Figure 4-74. Tilting the FRAME, PAPER, EJECT, ASSY
DISASSEMBLY & ASSEMBLY
Figure
Figure 4-74.
FRAME, PAPER, EJECT, ASSY
Disassembly/Assembly Procedure (Group 1)
FRAME, PAPER, EJECT, ASSY
Pull out the dowel of the
2
FRAME, PAPER,
EJECT, ASSY.
dowel
Figure 4-75. Removing the FRAME, PAPER, EJECT, ASSY
Revision C
Remove the FRAME, PAPER,
3
EJECT, ASSY in the direction of
the red arrow.
Push out the FRAME,
1
PAPER, EJECT, ASSY
toward the rear.
148