Epson Stylus Pro 3800 Service Manual page 123

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
4.3.5.3 MOTOR ASSY., CR
1. Remove the HOUSING, UPPER.
2. Unlock the CARRIAGE, ASSY. and move it to the center.
3. Push the HOLDER, PULLEY, DRIVEN in the direction of the arrow to reduce the tension of the BELT, CR, and remove the BELT, CR from the Pinion Gear of the MOTOR
ASSY., CR.
Direction to reduce the tension
HOLDER, PULLEY, DRIVEN
DISASSEMBLY & ASSEMBLY
(p107)
(p92)
BELT, CR
Figure 4-43. Removing the BELT, CR
Disassembly/Assembly Procedure (Group 1)
BELT, CR
Pinion Gear of the
MOTOR ASSY., CR
Revision C
123