Epson Stylus Pro 3800 Service Manual page 177

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
12. Insert the "Space Making Jig" in the position shown in
Before securing the FFC and tube with acetate tape in the next step,
C A U T I O N
make sure they are NOT in the following conditions.
The FFC is tightly routed and causing the "Space Making Jig"
to push the ink tube in the direction of the arrow.
Carriage
GUIDE, TUBE, CR
Ink tube
FFC
Too much slack in the FFC is causing the FFC to push the ink
tube in the direction of the arrow.
Carriage
Ink tube
FFC
13. With the "Space Making Jig" is attached, temporarily secure the ink tube, FFC,
GUIDE, TUBE, CR with acetate tape.
DISASSEMBLY & ASSEMBLY
Figure 4-114.
Space Making Jig
Space Making Jig
Disassembly/Assembly Procedure (Group 1)
Screw Center of Space Making Jig
Insert Space
Making Jig
between ink tube
and FFC.
Figure 4-114. Attaching the Space Making Jig
Acetate tape
Figure 4-115. Temporarily Securing with Acetate Tape
Revision C
Space Making Jig
Align center of Space
Making Jig with screw.
Align Space Making Jig
with frame R.
Frame R
Space Making Jig
GUIDE, TUBE, CR
Ink tube
177