Epson Stylus Pro 3800 Service Manual page 185

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
4.3.10.2 TIMING BELT, PF
1. Remove the HOUSING, UPPER.
2. Remove the SCALE, PF, 180. (p184)
3. Remove the retaining ring that secure the SPUR GEAR, 31.5.
See Figure 4-127.
4. Remove the two screws that secure the HOUSING, LOWER.
See Figure 4-128.
Two C.B.P. 3 x 8 screws (6 ± 1 kgf.cm)
DISASSEMBLY & ASSEMBLY
(p107)
Disassembly/Assembly Procedure (Group 1)
SPUR GEAR, 31.5 retaining ring
Figure 4-127. Removing the SUPUR GEAR, 31.5 (1)
HOUSING, LOWER
C.B.P. 3x8
Figure 4-128. Removing the screws from the HOUSING, LOWER
Revision C
C.B.P. 3x8
185