Epson Stylus Pro 3800 Service Manual page 191

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
14. Slide the CARRIAGE, ASSY rightward to remove it from the Carriage Shaft.
Whenever the CARRIAGE ASSY, is replaced, the corresponding
A D J U S T M E N T
R E Q U I R E D
adjustments must be carried out. See Chapter 5
(p208).
<Adjustment Item>
1. Print Head Slant Adjustment (CR)
2. PG Position Adjustment
3. Print Head Slant Adjustment (PF)
4. Ink Mark Sensor Adjustment for Auto Nozzle Check
5. Auto Uni-D Adjustment
6. Auto Bi-D Adjustment
7. T&B&S Adjustment
8. Colorimetric Calibration Tool
9. Print Image
DISASSEMBLY & ASSEMBLY
"ADJUSTMENT"
Disassembly/Assembly Procedure (Group 1)
CARRIAGE, ASSY.
Figure 4-139. Removing the CARRIAGE, ASSY.
Revision C
Carriage Shaft
191