Epson Stylus Pro 3800 Service Manual page 109

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
4.3.3.14 Disassembling the OPERATION, PANEL, ASSY.
1. Remove the OPERATION, PANEL, ASSY.
2. Remove the four screws that secure the SHIELD PLATE to the backside of the
OPERATION, PANEL, ASSY.
Four C.B.P. 3 x 8 screws (6 ± 1 kgf.cm)
3. Remove the SHIELD PLATE and the BOARD ASSY., PANEL from the
OPERATION, PANEL, ASSY.
When installing the SHIED PLATE, be sure to insert its two
positioning holes over the guide pins on the OPERATION
See Figure 4-21.
BUTTON.
When installing the BOARD ASSY. PANEL, be sure to insert
its four positioning holes over the guide pins two each on the
OPERATION BUTTON and the OPERATION PANEL.
See Figure 4-22.
DISASSEMBLY & ASSEMBLY
(p106)
See Figure 4-21.
Disassembly/Assembly Procedure (Group 1)
positioning point
C.B.P. 3x8
Figure 4-21. Removing the SHIELD PLATE
positioning point
BOAD ASSY., PANEL
Figure 4-22. Removing the BOARD, ASSY., PANEL
Revision C
OPERATION, PANEL, ASSY.
SHIELD PLATE
109