Epson Stylus Pro 3800 Service Manual page 174

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
5. Secure the MOUNTING PLATE, SELECT, INK with the screw.
One C.B.P. 2.5 x 8 screw (3±1 kgf.cm)
Insert the rib of the PRINT HEAD into the cutout of the
MOUNTING PLATE, SELECT, INK to secure the MOUNTING
PLATE, SELECT, INK.
6. Attach the both hooks of the EXTENSION SPRING, 5.63 to the hooked tabs one
each on the CARRIAGE, ASSY and LEAF SPRING, LOCK, HEAD.
Attach the EXTENSION SPRING, 5.63 so that its both ends face
toward the other side of the CARRIAGE, ASSY..
End
EXTENSION SPRING, 5.63
DISASSEMBLY & ASSEMBLY
OK NG
Disassembly/Assembly Procedure (Group 1)
Positioning point
C.B.P. 2.5x8
MOUNTING PLATE, SELECT, INK
Figure 4-108. Installing the MOUNTING PLATE, SELECT, INK
Hooked tabs
CARRIAGE, ASSY
EXTENSION SPRING, 5.63
Figure 4-109. Attaching the EXTENSION SPRING, 5.63
Revision C
LEAF SPRING, LOCK, HEAD
174