Epson Stylus Pro 3800 Service Manual page 152

Epson Stylus Pro 3800/3800C/3850/3880/3885/3890
4.3.9.2 COVER, CR
1. Remove the HOUSING, UPPER.
2. Remove the two screws that secure the COVER, CR and remove it.
One C.B.P. 3 x 6 screw (9 ± 1 kgf.cm)
One C.B.S. 3 x 6 screw (9 ± 1 kgf.cm)
The following are important points when installing the COVER,
C A U T I O N
CR.
As different types of screws are used, make sure to reinstall the
correct type of screws at the correct positions.
Before screwing the unit, make sure that the cables are not
trapped.
Make sure that the cables of the APG SENSOR are routed
through the cutout of the sponge of the COVER, CR.
Cable of APG SENSOR
DISASSEMBLY & ASSEMBLY
(p107)
COVER, CR
Sponge
Disassembly/Assembly Procedure (Group 1)
Overhead view
C.B.P. 3x6
Figure 4-79. Removing the COVER, CR
Revision C
COVER, CR
C.B.S. 3x6
152