Specifying The System Software To Be Used At The Next Startup - Huawei AR1200 Series User Configuration Manual

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration
----End

9.3.4 Specifying the System Software to Be Used at the Next Startup

After the system software to be used by the router at the next startup is specified, the patch status
file to be used at the next startup must be reset.
Context
Before specifying the system software to be used at the next startup, perform the following
operations:
Upload the system software to the master and slave MPUs. For details, see information about
uploading and downloading files in
Make sure that the storage media on the MPUs have sufficient space to store the system software.
Do as follows on the router to be upgraded:
Procedure
Step 1 In the user view, run:
startup system-software system-file
Issue 04 (2012-05-15)
ENTER = no change; '.' = clear;
Ftp type
File name
Ethernet ip address : 192.168.200.174
Ethernet ip mask
Gateway ip address
Ftp host ip address : 192.168.200.1
Ftp user
Ftp password
6. After the system returns to the network menu, select choice 4 to download the specified
system file from the PC.
NetWork Menu
1. Display parameter
2. Modify parameter
3. Save parameter
4. Download file
0. Return
Enter your choice(1-10): 4
7. Specify the location to save the system file.
Download file to: [ 1:flash 2:usb0 ]:
Enter the corresponding number to select the storage media. For example, 1 indicates
the flash memory.
NOTE
The device uses the flash as default settings. The other storage media such as USB flash drive
will be displayed only after they are installed.
8. After the system file is downloaded to the router, restart the router.
NOTE
Check the size and release date of the system software to be uploaded.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 0
: ar.cc
: ffffff00
:
: ar
: ar
Managing Files Using FTP
9 Upgrade and Maintenance
Commands.
202