Sending Information To The Telnet Terminal - Huawei V100R006C00 Configuration Manual

Quidway S5700 Series Ethernet Switches
Configuration Guide - Device Management
Step 4 Run:
terminal monitor
The terminal is enabled to display information.
By default, the terminal is enabled to display information.
Step 5 Run:
terminal debugging
or
terminal logging
or
terminal trapping
The terminal is enabled to display debugging information, logs, and traps.
----End

6.3.2 Sending Information to the Telnet Terminal

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center monitor channel { channel-number | channel-name }
Information is sent to the Telnet terminal.
Step 3 Run:
quit
Return to the user view.
Step 4 Run:
terminal monitor
The terminal is enabled to display information.
Step 5 Run:
terminal debugging
or
terminal logging
or
terminal trapping
The terminal is enabled to display debugging information, logs, and traps.
----End
Issue 01 (2011-07-15)
NOTE
Step 4 and Step 5 are not listed in sequence.
NOTE
Step 4 and Step 5 are not listed in sequence.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Monitoring the Device Through the Information Center
58