Select An Airport - LXNAV LX90 Series User Manual

LX90xx/LX80xx Version 5.0
5.5.6.1

Select an Airport

There are four different methods of selecting an airport. They are called filter mode, list
mode, map mode and history mode.
pressing the METHOD button several times.
Filter mode
Selecting an airport in filter mode is straightforward. Enter the first letter of the airport
name using the PAGE selector knob. The helper will show the first airport matching this
letter and the next few airports will be displayed in lower part of screen.
Press the CHAR>> button and cursor will move to the second letter.
selector knob to select the second letter. If you wish to return to the first letter turn the
ZOOM selector knob counter-clockwise.
You will note that part of the airport name is written in a darker colour. Once it becomes
white it means this is the only selection. Pressing GOTO will navigate directly to it. If there
are more than one airports starting with the filtered letters and you press the GOTO button
the cursor will jump to the beginning of the airport name. The PAGE selector knob will
select among the airports. Press GOTO once more and you will navigate to it.
If you do not know the exact name of an airport just select the first letter and
press the GOTO button. Now scroll to the desired airport using the PAGE
selector knob. Press the GOTO button once more and you will navigate to the
selected airport.
You can toggle between these four modes by
Page 102 of 166
June 2015
Use the PAGE