TrafficView Version 1.00
August 2019
4.10.1 Display
The display menu is used to adjust screen brightness parameters
Brightness setting is to adjust brightness of the screen. If automatic brightness is
enabled, this screen will indicate us brightness at the moment, which depends on ALS sensor
readings.
When Automatic brightness is enabled, the brightness can move between Minimum and
Maximum brightness setting. When ambient light is changing, the response time to get
brighter or to get darker in specified time can be set.
Night mode brightness is a setting where we can set extremely low brightness, for when
Traffic View is used under the night conditions.
4.10.2 Graphics
4.10.2.1
Traffic
In this menu we can choose between three different layouts: Modern, Classic and TCAS
layout.
Modern Layout enables 3D visualisation and
Urgent alerts are highlighted with coloured
segment indicating direction of
obstacle.
Classic uses classic Flarm watch warning.
Page 13 of 22