Flarm Symbols; Selecting And Switching Between Targets; Flarm Warning - LXNAV TrafficView Manual

TrafficView Version 1.00
which we don't know what direction are they travelling to. Flarm targets can be separated
only by their ID.
4.7.1

Flarm symbols

4.7.2

Selecting and switching between targets

Target could be selected using left and right push buttons. If target disappears when it's
selected, TrafficView will still indicate some information about its last known location.
Information about distance, altitude and vario will disappear. If target will appear back, it will
be traced again. In case that function Lock to nearest target is enabled, selection of
targets will not be possible.

4.8 Flarm Warning

If Flarm warnings are enabled the following is a typical screen display. First (Classic view) is
for normal Flarm warnings, second one is for undirected/PCAS warnings, third one is for
obstacle warnings.
The screen indicates relative position of threat. In the first image one glider is approaching
from right side (two o'clock) and 120m above.
If modern view is chosen, warnings will be displayed as 3D visualisation of the approaching
threat.
Page 11 of 22
August 2019