Jeep 2013 Wrangler Owner's Manual page 81

To hear the first available Menu, press the Voice
Command button and say "Help" or "Main
Menu".
Commands
The Voice Command system understands two
types of commands. Universal commands are
available at all times. Local commands are
available if the supported radio mode is active.
Changing The Volume
1. Start a dialogue by pressing the Voice Com-
mand button.
2. Say a command (e.g., "Help").
3. Use the ON/OFF VOLUME rotary knob to
adjust the volume to a comfortable level while
the Voice Command system is speaking.
Please note the volume setting for Voice Com-
mand is different than the audio system.
Main Menu
Start a dialogue by pressing the Voice Com-
mand button. You may say "Main Menu" to
switch to the main menu.
PAGE POSITION: 81 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1
In this mode, you can say the following com-
mands:
• "Radio AM" (to switch to the radio AM mode)
• "Radio FM" (to switch to radio FM mode)
• "Disc" (to switch to the disc mode)
• "USB" (to switch to USB mode)
• "Bluetooth
Streaming" (to
Bluetooth Streaming mode)
• "Memo" (to switch to the memo recorder)
• "System Setup" (to switch to system setup)
Radio AM (Or Radio Long Wave Or Radio
Medium Wave — If Equipped)
To switch to the AM band, say "AM" or "Radio
AM". In this mode, you may say the following
commands:
• "Frequency #" (to change the frequency)
• "Next Station" (to select the next station)
• "Previous Station" (to select the previous
station)
• "Menu Radio" (to switch to the radio menu)
• "Main Menu" (to switch to the main menu)
Radio FM
To switch to the FM band, say "FM" or "Radio
FM". In this mode, you may say the following
commands:
• "Frequency #" (to change the frequency)
• "Next Station" (to select the next station)
• "Previous Station" (to select the previous
switch to
station)
• "Menu Radio" (to switch to the radio menu)
• "Main Menu" (to switch to the main menu)
Disc Mode
To switch to the disc mode, say "Disc". In this
mode, you may say the following commands:
• "Track" (#) (to change the track)
• "Next Track" (to play the next track)
• "Previous Track" (to play the previous track)
• "Main Menu" (to switch to the main menu)
USB Mode
To switch to USB mode, say "USB". In this
mode, you may say the following commands:
• "Next Track" (to play the next track)
79