Phone Call Features - Jeep 2013 Wrangler Owner's Manual

• The Uconnect Phone will ask you to verify
that you wish to delete all the entries from the
phonebook.
• After confirmation, the phonebook entries will
be deleted.
• Note that only the phonebook in the current
language is deleted.
• Automatic downloaded phonebook entries
cannot be deleted or edited.
List All Uconnect Phonebook Names
• Press the
button to begin.
• After the "Ready" prompt and the following
beep, say "Phonebook List Names".
• The Uconnect Phone will play the names of
all the phonebook entries, including the
downloaded phonebook entries, if available.
• To call one of the names in the list, press the
button during the playing of the desired
name, and say "Call".
NOTE:
The user can also exercise "Edit" or "De-
lete" operations at this point.
PAGE POSITION: 69 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1
• The Uconnect Phone will then prompt you
as to the number designation you wish to
call.
• The selected number will be dialed.

Phone Call Features

The following features can be accessed through
the Uconnect Phone if the feature(s) are avail-
able on your mobile service plan. For example,
if your mobile service plan provides three-way
calling, this feature can be accessed through
the Uconnect Phone. Check with your mobile
service provider for the features that you have.
Answer or Reject an Incoming Call - No
Call Currently in Progress
When you receive a call on your mobile phone,
the Uconnect Phone will interrupt the vehicle
audio system, if on, and will ask if you would like
to answer the call. Press the
accept the call. To reject the call, press and hold
the button until you hear a single beep,
indicating that the incoming call was rejected.
Answer or Reject an Incoming Call - Call
Currently in Progress
If a call is currently in progress and you have
another incoming call, you will hear the same
network tones for call waiting that you normally
hear when using your mobile phone. Press the
button to place the current call on hold and
answer the incoming call.
NOTE:
The Uconnect Phone compatible phones in
the market today do not support rejecting an
incoming call when another call is in prog-
ress. Therefore, the user can only answer an
incoming call or ignore it.
Making a Second Call While Current Call in
Progress
To make a second call while you are currently
on a call, press the
button to
"Call" followed by the phone number or phone-
book entry you wish to call. The first call will be
on hold while the second call is in progress. To
go back to the first call, refer to "Toggling
Between Calls". To combine two calls, refer to
"Conference Call".
button and say "Dial" or
67