Jeep 2013 Wrangler Owner's Manual page 112

NOTE:
Ensure the front Freedom panel latch is
closed prior to inserting the panel into the
bag.
Unfold the outer flap and zip the Freedom bag
closed.
110
PAGE POSITION: 112 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1
Install the seat attachment strap (at the top of
the bag) through the loops.
Lift the Freedom bag into the vehicle with the
hooks and straps facing the back of the rear
seat. Attach the clips at the bottom of the bag to
the child restraint anchorages, located at the
base of the rear seat.
Wrap the upper strap around the rear head
restraints and loop the strap through the buckle.
Pull on the strap to tighten the Freedom bag
securely against the rear seat.