Jeep 2013 Wrangler Owner's Manual page 149

14. Insert the retainer along the bottom edge of
the window into the bottom side channel, begin-
ning at the front and working to the rear of the
vehicle. Finish by closing the zipper completely
and attaching the Velcro along the top and rear
of the window. Repeat this step for the opposite
side.
PAGE POSITION: 149 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1
15. Locate the black swing gate bar. Slide the
swing gate bar over the receiver at the bottom
inside of the rear window. The spongy part of
the seal should be down and pointed outward to
seal with the swing gate when closed.
16. Install the rear window by starting both
zipper ends at the lower left corner of the rear
window opening. Ensure that the zippers are
properly started and aligned before zipping to
prevent damage.
17. Run the first zipper fully around to the right
side of the window.
147