Fluids, Lubricants And Genuine Parts; Engine - Jeep 2013 Wrangler Owner's Manual

FLUIDS, LUBRICANTS AND GENUINE PARTS

Engine

Component
Engine Coolant
Engine Oil – Gasoline (Non ACEA Catego-
ries)
Engine Oil – Gasoline (ACEA Categories)
Engine Oil – Diesel (with Particulate Filter)
Engine Oil – Diesel (without Particulate
Filter)
Spark Plugs – 3.6L Engine
Engine Oil Filter
Fuel Selection – Gasoline Engines
Fuel Selection – Diesel Engines
PAGE POSITION: 313 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1
Fluid, Lubricant, or Genuine Part
We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Ad-
ditive Technology) that meets the requirements of Chrysler Material Standard MS-12106 such as,
PARAFLU UP FIAT Certification 9.55523
For best performance and maximum protection under all types of operating conditions, we recom-
mend 5W-20 engine oils that are API certified and meet the requirements of Chrysler Material Stan-
dard MS-6395 such as, SELENIA K POWER 5W-20 FIAT Certification 9.55535-CR1.
For countries that use the ACEA European Oil Categories for Service Fill Oils, we recommend you
use 5W-20 engine oils that meet the requirements of Chrysler Material Standard MS-6395 such as,
SELENIA K POWER 5W-20 FIAT Certification 9.55535-CR1.
SAE 5W-30 engine oil approved to ILSAC GF-5 may be used when SAE 5W-20 engine oil meeting
MS-6395 is not available.
For vehicles equipped with a Diesel Particulate Filter (DPF), we recommend you use 5W-30 full syn-
thetic, low ash oil that meets the requirements of Chrysler Material Standard MS-11106, such as,
SELENIA MULTIPOWER C3 FIAT Certification 9.55535–S3.
For vehicles that are not equipped with a Diesel Particulate Filter (DPF), we recommend you use
0W-40 full synthetic engine oil that meets Chrysler Material Standard MS-10725 such as, SELENIA K
POWER 0W-40.
We recommend you use MOPAR Spark Plugs.
We recommend you use MOPAR Engine Oil Filters.
91 Octane
50 Cetane or higher (Less than 50 ppm Sulfur)
311