Jeep 2013 Wrangler Owner's Manual page 49

IL = Suitable for particular ISOFIX child restraint
systems (CRS) given in the attached list. These
ISOFIX CRS are those of the "specific vehicle",
"restricted" or "semi-universal" categories.
X = ISOFIX position not suitable for ISOFIX
child restraint systems in this mass group
and/or this size class.
Installing The ISOFIX-Compatible Child
Restraint System
We urge you to carefully follow the directions of
the manufacturer when installing your child re-
straint. Not all child restraint systems will be
installed as described here. Again, carefully
follow the installation instructions that were pro-
vided with the child restraint system.
The rear seat lower anchorages
are round bars, located at the rear
of the seat cushion where it meets
the seatback, and are visible when
you lean into the rear seat to install
the child restraint. You will easily feel them if you
run your finger along the intersection of the
seatback and seat cushion surfaces.
PAGE POSITION: 49 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1
Latch Anchorages (Two-Door Models)
Latch Anchorages (Four-Door Models)
In addition, there are tether strap anchorages
behind each rear seating position located on the
back of the seat.
Tether Strap Mounting (Two-Door Models)
47