Jeep 2013 Wrangler Owner's Manual page 128

12. As you begin to lower the top, fold the sail
panels so that they rest on top of the soft top.
13. The swing gate brackets do not need to be
removed unless the hard top is being installed.
To remove the swing gate brackets, pull the
front of the bracket forward while rolling the
entire bracket back in toward the vehicle to
disengage.
126
PAGE POSITION: 128 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1
14. Completely release the latches from the
loops on the windshield frame. If your vehicle
is not equipped with the Sunrider package,
proceed to Step 15.
15. Make sure the plastic sleeves are slid rear-
ward over the Sunrider link (Sunrider Models
only).
16. Unlatch the side bows from both door rails
(Sunrider Models only).