Jeep 2013 Wrangler Owner's Manual page 108

• Right and left quarter windows
• Rear window
2. Remove the hard top. Refer to "Freedom Top
Three-Piece Modular Hard Top — Front/Rear
Panel Removal" in this section.
3. Install the door frames. Refer to "Door
Frame" in this section.
4. Install the soft top with the pivot brackets
above the sport bar brackets, lower the soft top
into the sport bar bracket slots in a downward
motion to lock tab on soft top. You will need to lift
the top to get the brackets to line up. (Another
person may be needed to help with this opera-
tion.)
NOTE:
If you are doing this alone, use one arm to
hold the soft top up, the other to align the
brackets.
106
PAGE POSITION: 108 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1
5. Lower the pivot bracket onto the sport bar
bracket mounting tab in a downward motion to
lock into tab.
6. Screw the pivot screws back into place using
a #T30 Torx head driver. Secure them until
they are snug, being careful not to cross-thread
the screws or overtighten.
CAUTION!
Do not overtighten the screws. You can strip
the screws if they are overtightened.
7. Remove the tether strap from the pivot
bracket.