Blank Template - Philips IntelliVue Telemetry System Infrastructure Installation And Service Manual

Chapter 2: Planning Your ITS Deployment
• IP Addressing: Subnet Mask - Enter the Static Subnet Mask documented for the
APC Configuration.
• IP Addressing: Default Gateway - Enter the Static Default Gateway documented
for the APC Configuration.

Blank Template

Settings
Partnered APC
Default Group
Radio Regulations
Frequency Plan
ZigBee channel used for medical
RF Access Code
IP Addressing: Subnet mask
IP Addressing: Default gateway
2-34
Rules
Specify radio regulations that apply to
country in which 2.4 GHz ITS is
installed. Circle applicable regulations
at right.
2.4 GHz Must Co-exist with Installed
2.4 GHz 802.11 b/g Systems
Circle 802.11 plan at right.
Specify the ZigBee channel used for
medical purposes at the installation
site. Possible selections are channels
11 to 26.
Enter any number from 1 to 254 at
right. (not 0 and not 255)
[Copy from APC Configuration]
[Copy from APC Configuration]
Value
Any
Smart-hopping
ETSI
FCC
RSS-210
AS/NZ
ARIB (Japan)
1, 6, 11
1, 7, 13
Advanced - Enter a min. of 3 and a
max. of 6 channels for use by the ITS.
None (Site Specific)
1 (or other Site-specific Value)