Philips IntelliVue Telemetry System Infrastructure Installation And Service Manual page 51

RA 1
In interleaved deployments, the RAs are located in between an adjacent Remote
Antenna and its Core AP, resulting in an "overlap" of the Core APs. An interleaved
design builds in some fault tolerance/redundancy to the RF coverage area.
RA 1
The following figures represent various possible Core AP deployments.
Figure 2-7 shows a single Core AP deployment. This deployment may be made with
either none, one, or two remote Antennas.
IntelliVue Telemetry System Infrastructure Installation and Service Guide
RA 2
Core AP
Figure 2-5: A Linear Core AP Deployment
Core AP
RA 2 RA 1
Figure 2-6: An Interleaved Core AP Deployment
Figure 2-7: A Single Core AP Deployment
Performing a Physical Space Assessment
RA 1
Core AP
RA 2 RA 1
Core AP
RA 2
RA 2
2-9