Table of Contents
Advertisement
Chapter 1: Overview
System Limits
Note the following important ITS system limits.
Access Point Controllers
1.4 GHz Standard Access Points
1.4 GHz Core Access Points
1.4 GHz Remote Antennas
2.4 GHz Access Points
1.4 GHz Patient-worn Transceivers
2.4 GHz Patient-worn Transceivers
IntelliVue Telemetry System Specifications
This section lists power, radio, and regulatory compliance specifications for the
IntelliVue Telemetry System.
Power Requirements
Standard or Core
Access Point
SYNC Unit
POE with 1 AP
POE with 12 AP
Access Point
Controller
1-24
Table 1-11: Maximum ITS Capacities
ITS Device
Table 1-12: ITS Component Power Requirements
Device/
Input Voltage
Component
(VAC/ VDC)
48 VDC Nominal
(44 - 52) VDC
287 mA
88-264 VAC
88-264 VAC
88-264 VAC
88-264 VAC
Maximum Supported
9 (includes one for redundancy)
320 (routed ICN topology)
48 (non-routed ICN topology)
320 (routed ICN topology)
48 (non-routed ICN topology)
640 (routed ICN topology)
96 (non-routed ICN topology)
2.4 GHz ITS does not support routed ICN topology.
48 (non-routed ICN topology)
1024 (routed ICN topology)
128 (non-routed ICN topology)
2.4 GHz ITS does not support routed ICN topology.
128 (non-routed ICN topology)
Manual
Switching
Frequency
Required?
No
No
No
No
No
Input
Dissipated
Power
(Hz)
(Max - Watts)
DC
< 13.8W
47-63
< 10W/18VA
47-63
< 20W/50VA
47-63
< 165W
47-63
< 10W/40VA
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
