Document Organization - Philips IntelliVue Telemetry System Infrastructure Installation And Service Manual

About This Guide
Audience

Document Organization

x
The IntelliVue Telemetry System Infrastructure Installation and Service
Guide is written for qualified service personnel who will install, configure,
and service the 1.4 or 2.4 GHz IntelliVue Telemetry System infrastructure
as part of an overall IntelliVue Clinical Network (ICN) deployment.
The information in this guide is organized and presented as follows:
• Chapter 1, Overview, describes the IntelliVue Telemetry System and
how it is used to provide a bi-directional data flow between the
IntelliVue Information Center and patient-worn transceivers and
wireless bedside monitors.
• Chapter 2, Planning Your ITS Deployment, provides information and
procedures that must be followed to ensure a successful IntelliVue
Telemetry System deployment.
• Chapter 3, Installing and Configuring the ITS, gives complete
procedures to physically install the IntelliVue Telemetry System
components and configure the ITS Access Point Controllers and
Access Points.
• Chapter 4, Expanding or Modifying an Installed ITS, lists procedures to
expand or modify an existing, installed IntelliVue Telemetry System.
• Chapter 5, Troubleshooting and Testing, includes procedures to
troubleshoot and test an IntelliVue Telemetry System installation.
• Appendix A, Installing Multiple ITSs a Single Hospital Site, lists
configuration rules and guidelines to enable you to install up to 22
totally independent IntelliVue Telemetry Systems at a given
installation site.
• Appendix B, Routed Topology Configuration Information, provides
important information to help you configure a routed ITS topology.