Table of Contents
Advertisement
Fractal Audio Systems MFC-‐101 Manual
12.1.4 Preset Instant Access Switch States
EDIT : PRESET : PAGE"
Preset Instant Access Switch States is used to set the initial ON/OFF state of each IA Switch when the selected preset is loaded.
The saved state determines whether the ON messages or OFF messages will be sent for a given IA Switch when the selected
preset is loaded. The burst of initial data caused by saved IA Switch states provides a kind of "scene recall" for your rig
triggered simply by loading a preset. After they are initially set, the states of IA Switches can be changed any time just by
stomping.
You must first select a preset (12.1.0 on p. 43) to edit it using this menu page.
PARAMETER
" footswitches to switch between IA Switch Number and IA Switch State parameters.
Use the !
NOTE: The saved states for IA Switches set to Axe-‐Fx Functions (see 12.4.7) are IGNORED. Instead, the actual effect block states
saved in the Axe-‐Fx preset are used to dynamically set the MFC-‐101 switch states (and LEDs):
GREEN=PRESENT & ACTIVE
RED=PRESENT & BYPASSED
OFF=NOT PRESENT
NOTE: IA Switch states can also be stored on-‐the-‐fly using the
12.1.5 Preset Internal Control Change States
EDIT : PRESET : PAGE"
Preset Internal Control Change States is used to set whether the ON message or OFF message for each enabled Internal
Control Change (12.4.12 and 12.4.13) will be sent when the selected preset is loaded. As with IA Switches, the burst of initial
data caused by saved Internal CC states provides a kind of "scene recall" for your rig triggered simply by loading a preset.
Internal CCs ONLY have a saved initial state – they are not assignable to switches for stomping.
You must first select a preset (12.1.0 on p. 43) to edit its saved Internal Control states using this menu page.
PARAMETER
" footswitches to switch between Internal CC Number and Internal CC State parameters.
Use the !
Doc v3.0
(4x)
(5x)
SAVE
footswitch (see 12.5.22).
PRESET MENU REFERENCE
45
Advertisement
Table of Contents
Need help?
Do you have a question about the MFC-101 MARK III and is the answer not in the manual?
Questions and answers