Table of Contents
Advertisement
Fractal Audio Systems MFC-‐101 Manual
enabled, the Save footswitch LED will flash when IA switch states are changed. Pressing it will store
the MFC-‐101 preset.
! UP and DOWN are used to select the next or previous Bank or Song.
1.2.2 Footswitch EDIT MODE Functions
The footswitches perform secondary functions when the MFC-‐101 is in EDIT MODE:
! After EDIT is pressed once, footswitches 1–5 are used to enter the 5 main menus:
PRESET, SONG/SET, COPY, MIDI, and SETUP.
! The two !PAGE" footswitches (6 & 7) step back and forth through the pages of the current menu.
! The two !PARAMETER" footswitches (11 & 12) select editable parameters on the current page.
! The (INCRement and DECRement footswitches (UP and DOWN) change the value of the currently
selected parameter.
You can hold any of the above to scroll quickly through the list of pages/parameters/values.
! ENTER (footswitch 14) is used to execute various functions. Examples include Preset Copy, Factory
Restore or SysEx Dump. The LED above this footswitch flashes red when ENTER can be used to
perform some action, and to remind you that such operations are committed to memory immediately
with no turning back.
! EXIT is the secondary function of the EDIT footswitch. Pressing this footswitch while in in EDIT MODE
will save all changes and return the MFC-‐101 to PERFORMANCE MODE.
! NAMES (footswitch 9) makes it easier to customize your MFC-‐101 for easy operation. It allows you to
view the short NAMES you may assign to various items throughout the the memory of the MFC-‐101. A
MIDI Channel, for example, might be named "Gizmo" or an Instant Access Switch might be named
"Extern 8". See Chapter 11 for details on how to enter names.
Doc v3.0
Figure 1-‐3: Layout of an MFC-‐101 Footswitch
OVERVIEW
3
Advertisement
Table of Contents
Need help?
Do you have a question about the MFC-101 MARK III and is the answer not in the manual?
Questions and answers