Internal Ccs; Internal Cc Midi Commands - Fractal Audio MFC-101 MARK III Owner's Manual

INTERNAL CCs
6 INTERNAL CCs
The MFC-­‐101 allows you to set up 17 "Internal Control Changes"—think of them as virtual switches. These are
similar to Instant Access Switches in that they send CC# messages and can have custom ON and OFF values, but
unlike Instant Access switches, Internal CCs cannot be mapped to real footswitches. Instead, a snapshot of Internal
CC ON/OFF states is saved in every MFC-­‐101 preset, causing a burst of MIDI data to be sent whenever a new preset
is loaded.
Use Internal CCs to control effects or functions whose states you do not need to change except when a new preset
is loaded—for example, to have the echo in a MIDI-­‐controlled vocal processor come on every time you load an
Axe-­‐Fx lead preset, and OFF when you change to the Rhythm preset.
6.1 Internal CC MIDI commands
All Internal CCs are set to OFF by default. To enable an Internal CC, simply assign a MIDI CC# and MIDI Channel
using the Internal Control Change Settings page:
1. Press the EDIT footswitch to enter EDIT MODE.
2. Press MIDI footswitch to select the MIDI menu.
3. Press PAGE" footswitch 11x to get to the Internal CC Settings screen:
4. Press and/or hold INCR or DECR footswitches to select an Internal CC to edit.
5. Press PARAMETER" footswitch to select the CC# Assign field.
6. Press and/or hold INCR or DECR footswitch to assign a CC# to the Internal CC.
7. Press PARAMETER" footswitch to select the MIDI Channel field.
8. Press and/or hold INCR or DECR to set the desired MIDI channel.
9. Press !PARAMETER 2x to return to the first cursor position and repeat this process from step 4
for each additional Internal CC you want to enable, or press EXIT to return to PERFORMANCE
MODE.
Internal CC values are set by default to 0 for OFF and 127 for ON. See section 12.4.9 on p. 56 for details on how to
set custom on/off data values for IA switches.
30
Fractal Audio Systems MFC-­‐101 Manual
Doc v3.0