Table of Contents
Advertisement
Fractal Audio Systems MFC-‐101 Manual
12.5.10 IA Switch Types
EDIT : SETUP : PAGE"
(10x)
IA Switch Types is used to set the switch behavior for Instant Access Switches.
PARAMETER
!
" footswitches select between Instant Access Switch Number and Switch Type parameters.
Select an IA Switch by its number, then press
Toggle:
(DEFAULT) AKA "Latching" switches send their On messages when pressed ON (changing the LED to green)
and their off messages when pressed OFF (changing their LED to RED).
Momentary:
AKA "Hold" switches send their ON message streams when pressed and their OFF message streams when
released.
Auto Off:
Stepping on the selected switch will send both ON and OFF messages in quick succession (~250ms apart).
Switch type behaviors apply whether the selected switch is set up for an Axe-‐Fx function or for general use.
12.5.11 Global IA Switch Setup
EDIT : SETUP : PAGE"
(11x)
Global IA Switch setup determines whether IA Switches retain their settings across preset changes. Global IA switch data for
the current state is re-‐transmitted after every preset change. While Axe-‐Fx Mode is ON, IA Switches with Axe-‐Fx functions will
ignore this setting, using the saved information in the Axe-‐Fx preset (as usual) instead of operating globally.
PARAMETER
" footswitches select the IA Switch Number parameter and the Global Yes/No switch.
The !
12.5.12 IA Switch Send w/ Preset
EDIT : SETUP : PAGE"
(12x)
IA Switch Send w/ Preset determines whether the IA Switch specified will transmit the MIDI payload for its on/off state—
whether stored or global—upon MFC-‐101 preset changes. While Axe-‐Fx Mode is ON, IA Switches with Axe-‐Fx functions will
ignore this setting, using the saved information in the Axe-‐Fx preset (as usual) instead of operating globally.
PARAMETER
" footswitches select the IA Switch Number parameter and the Yes/No switch.
The !
Doc v3.0
PARAMETER
" and set the Switch Type:
SETUP MENU REFERENCE
65
Advertisement
Table of Contents
Need help?
Do you have a question about the MFC-101 MARK III and is the answer not in the manual?
Questions and answers