Table of Contents
Advertisement
SETUP MENU REFERENCE
12.5.3 MFC-‐101 Display Offset
EDIT : SETUP : PAGE"
(3x)
MFC-‐101 Display Offset is used to offset the numbers of MFC-‐101 presets so they match the preset numbers of a connected
Axe-‐Fx using display offset (causing its presets to be numbered 1-‐384 instead of 0-‐383).
NOTE: This is purely a user interface setting and does not impact MIDI output.
12.5.4 MIDI Channel Display Offsets
EDIT : SETUP : PAGE"
(4x)
MIDI Channel Display Offsets is used to set up the MFC-‐101 so that its user interface shows program numbers beginning from
1 instead of 0 for a connected device located at a given MIDI channel.
PARAMETER
" footswitches move between MIDI Channel and Display Offset parameters.
The !
Change this setting to 1 for the MIDI channel of any connected device which numbers its presets from 1 instead of 0.
NOTE: The MFC-‐101 has a separate dedicated Display Offset setting for a connected Axe-‐Fx (12.5.2).
NOTE: This is only a user interface setting. It makes the preset numbers shown in the MFC-‐101 Preset Program Change menu
(12.1.2) match the numbering of presets on a connected device. This setting does not affect MIDI output.
12.5.5 MIDI Channel Names
EDIT : SETUP : PAGE"
(5x)
MIDI Channel Names is used to set "friendly" names representing the various devices connected to the MFC-‐101 on MIDI
Channels 1-‐16.
PARAMETER
" footswitches move the cursor between the MIDI Channel parameter and individual characters of the
The !
MIDI Channel Name.
The name of a selected channel appears briefly as a memory aid when the
any "Midi Channel" parameter on any MFC-‐101 menu page.
62
Fractal Audio Systems MFC-‐101 Manual
NAMES
footswitch is pressed while the cursor is in
Doc v3.0
Advertisement
Table of Contents
Need help?
Do you have a question about the MFC-101 MARK III and is the answer not in the manual?
Questions and answers