BASIC SETTINGS
Press EDIT footswitch to enter EDIT MODE.
1.
Press SETUP footswitch to select the SETUP menu.
2.
Press PAGE" 3x to get to the MFC Display Offset Screen:
3.
Press the INCR or DECR footswitch to set Display Offset as desired.
4.
Press EXIT to return to PERFORMANCE MODE.
" NOTE: It is also possible to set a display offset for other connected devices. See section 12.5.4 on p. 62 for more details.
3.5 Performance Modes
The MFC-‐101 offers three different variants of PERFORMANCE MODE. These are PRESET MODE, SONG MODE, and
SET MODE. Each of the modes is covered throughout this manual. Key concepts and differences are noted in the
table below:
MODE
PRESETS
PRESET MODE:
384 Presets total are arranged in
strict numerical order
The number of preset footswitches
per Bank is set by the global Bank
Size parameter.
SONG MODE:
Uses the same 384 presets as
PRESET MODE, but arranged as
desired on the preset footswitches
for each of 100 Songs. Up to Presets
may be added to each Song, though
the global Bank Size imposes a limit
on how many of these you'll have
access to.
3
SET MODE {1-‐10}
:
Up to 50 Songs may be added to
each Set. Uses the same Songs as
SONG MODE, and therefore their
same Presets. If the selected Set has
a NAME, it will be shown in the
Performance Mode menu while you
are making a selection.
2
MFC-‐101 presets are numerically sequenced across banks in PRESET MODE, but the actual MIDI Program Change
commands sent by any preset may be modified freely. See Presets and Program Changes on p. 16.
3
Whereas PRESET MODE and SONG MODE are singular entries in the Operating Mode menu, there are actually 10
entries for SET MODE, one for each of the available set lists.
14
UP/DOWN FOOTSWITCHES
UP/DOWN footswitches step through all Banks in
2
across Banks.
strict numerical order. The number of banks
depends on the global Bank size.
UP/DOWN footswitches step through all 100
Songs in strict numerical order.
UP/DOWN footswitches step in order through the
Songs of the current Set.
Fractal Audio Systems MFC-‐101 Manual
Doc v3.0
Need help?
Do you have a question about the MFC-101 MARK III and is the answer not in the manual?
Questions and answers